Metal Shell Medium Base Dimmer Sockets
Rands Creative Creations
Harold Rand Enterprises
3729 Freeman Rd
Jacksonville FL 32207
904 398 7925
800 255 8052
FULL-RANGE DIMMER SOCKET
ALUMINUM SHELL
HEIGHT 2-3/4" • DIAMETER 1-1/2"
BUSHING TAPPED 1/8 IPS
Provides 0 to 100% Dimming Control
Fits easily on any Table Lamp
Eliminates the use of
Expensive 3-Way Bulbs
Saves Electricity - Extends Bulb Life
Rated 150W-120V
WITH SET SCREW
D02-D4038 Polished Gilt
D02-D7038 Polished Gilt (Leviton Brand)
K02-32069 Nickel plated
Rated 200W-120V
WITH SET SCREW
D03-30769 Polished Gilt
D03-30787 Polished Brass W/Brass Knob
D03-30768 Nickel Finished
HI-LO DIMMER SOCKET
TURN-KNOB
BUSHING TAPPED 1/8 IPS
FOR USE WITH STANDARD
INCANDESCENT LAMP
LOW SETTING IS 50% BRIGHTNESS
Rated 150W - 120V
WITH SET SCREW
D02-D430 Polished Gilt
D03-30423 Polished Brass
D03-30427 Nickel Finish
WITH SET SCREW AND UNO THREAD
D03-30425 Polished Brass
WITHOUT SET SCREW 200-Piece Pack
D02-D5430 Polished Gilt
This page was last updated: August 7, 2011
Page
H002-1
Best if viewed with 1024 resolution!!!!
UNIVERSAL 4-WAY
TURN-KNOB
NIGHT LIGHT-LO-MED-HI-OFF
FOR USE WITH WITH
ANY STANDARD INCANDESCENT LAMP,
UP TO 150 WATTS
(3-WAY LIGHT BULB NOT REQUIRED)
BUSHING TAPPED 1/8 IPS
Push-In Terminals
Rated 150W - 120V
WITH SET SCREW
D02-D4052 Brite Gilt
S05-80-1505 Nickel
Splined Key
3/8" Extention
For Dimmer Socket
Converts Existing Knob to Knob
with #6-32M Thread
D02-B945 Brass (ADL D02-D4038
Phenolic Dimmer Knob
Replacement Knob for D02-D7038
D02-D679 Ivory
Phenolic Dimmer Knob
Replacement Knob for D02-D4038
and K02-32069
S05-80-1757 Brass Plated
S05-80-1758 Nickel Plated
FULL-RANGE DIMMER SOCKET
TURNED BRASS SHELL
Provides 0 to 100% Dimming Control
Fits easily on any Table Lamp
Eliminates the use of
Expensive 3-Way Bulbs
Saves Electricity - Extends Bulb Life
Rated 150W-120V
1/8 IP WITH SET SCREW
S05-80/1320AL Antiqued and lacquered
S05-80/1320SL Satin and lacquered
S05-80/1064 Polished and lacquered
S05-80-1065 Nickel plated
S05-80/1320 Unfinished
1/4 IP WITH SET SCREW
S05-80/1795 Polished and lacquered
1/8 IP WITH SET SCREW AND UNO THREAD
S05-80/1066 Polished and lacquered
S05-80-1067 Nickel plated
Rated 200W-120V
1/8 IP WITH SET SCREW
S05-80/1703 Polished and lacquered
S05-80-1704 Nickel plated
FULL-RANGE DIMMER SOCKET
STAMPED BRASS SHELL
Provides 0 to 100% Dimming Control
Fits easily on any Table Lamp
Eliminates the use of
Expensive 3-Way Bulbs
Saves Electricity - Extends Bulb Life
Rated 150W-120V
1/8 IP WITH SET SCREW
S05-80/1042 Polished and lacquered
S05-80-1043 Nickel plated
1/8 IP WITH SET SCREW AND UNO THREAD
S05-80/1044 Polished and lacquered
S05-80-1045 Nickel plated
Rated 200W-120V
1/8 IP WITH SET SCREW
S05-80/1695 Polished and lacquered
S05-80-1696 Nickel plated
RCCHRE
