Dimmer In Line, Sockets and Cord Assembly 
This page was last updated: March 14, 2011
Splined Key
3/8" Extention
For Dimmer Socket
Converts Existing Knob to Knob
with #6-32M Thread

D02-B945 Brass     (ADL D02-D4038)
Phenolic Dimmer Knob
Replacement Knob for D02-D7038

D02-D679 Ivory

Phenolic Dimmer Knob
Replacement Knob for D02-D4038
and K02-32069
S05-80-1757    Brass Plated
S05-80-1758    Nickel Plated
Page
Rands Creative Creations
Harold Rand Enterprises
3729 Freeman Rd
Jacksonville FL 32207
904 398 7925
800 255 8052
cs@hrelampparts.com
Best if viewed with 1024 resolution!!!!
H033
Full-Range Dimmer Socket
Brown Turn-Knob
Height 3-3/4"
Bushing Tapped 1/8 IPS
Provides 0 to 100% Dimming Control
5 1/2" AWM B/W 150°C Leads
Uses Standard bulb
Rated 150W-120V

With Set Screw
S05-80/1167
FULL-RANGE DIMMER SOCKET
ALUMINUM SHELL
HEIGHT 2-3/4" • DIAMETER 1-1/2"
BUSHING TAPPED 1/8 IPS
Provides 0 to 100% Dimming Control
Fits easily on any Table Lamp
Eliminates the use of
Expensive 3-Way Bulbs
Saves Electricity - Extends Bulb Life

Rated 150W-120V
WITH SET SCREW
D02-D4038    Polished Gilt
D02-D7038    Polished Gilt (Leviton Brand)
K02-32069   Nickel plated

Rated 200W-120V
WITH SET SCREW
D03-30769    Polished Gilt
D03-30787    Polished Brass  W/Brass Knob
D03-30768    Nickel Finished
HI-LO DIMMER SOCKET
TURN-KNOB
BUSHING TAPPED 1/8 IPS
FOR USE WITH STANDARD
INCANDESCENT LAMP
LOW SETTING IS 50% BRIGHTNESS
Rated 150W - 120V

WITH SET SCREW
D02-D430      Polished Gilt
D03-30423     Polished Brass
D03-30427     Nickel Finish

WITH SET SCREW AND UNO THREAD
D03-30425     Polished Brass

WITHOUT SET SCREW 200-Piece Pack
D02-D5430    Polished Gilt              
FULL-RANGE DIMMER SOCKET
STAMPED BRASS SHELL
Provides 0 to 100% Dimming Control
Fits easily on any Table Lamp
Eliminates the use of
Expensive 3-Way Bulbs
Saves Electricity - Extends Bulb Life

Rated 150W-120V
1/8 IP WITH SET SCREW
S05-80/1042     Polished and lacquered
S05-80-1043     Nickel plated

1/8 IP WITH SET SCREW AND UNO THREAD
S05-80/1044     Polished and lacquered
S05-80-1045     Nickel plated

Rated 200W-120V
1/8 IP WITH SET SCREW
S05-80/1695     Polished and lacquered
S05-80-1696     Nickel plated
FULL-RANGE DIMMER SOCKET
TURNED BRASS SHELL
Provides 0 to 100% Dimming Control
Fits easily on any Table Lamp
Eliminates the use of
Expensive 3-Way Bulbs
Saves Electricity - Extends Bulb Life

Rated 150W-120V
1/8 IP WITH SET SCREW
S05-80/1320AL     Antiqued and lacquered
S05-80/1320SL     Satin and lacquered
S05-80/1064         Polished and lacquered
S05-80-1065         Nickel plated
S05-80/1320         Unfinished

1/4 IP WITH SET SCREW
S05-80/1795     Polished and lacquered

1/8 IP WITH SET SCREW AND UNO THREAD
S05-80/1066     Polished and lacquered
S05-80-1067     Nickel plated

Rated 200W-120V
1/8 IP WITH SET SCREW
S05-80/1703     Polished and lacquered
S05-80-1704     Nickel plated