Marble Breaks and Bases
  *Countersunk refer to a stepped hole on bottom of base to allow for lamp           pole hardware not to interfere with bottom of base.
**Wire way is a slot or hole for the wire to exit the base.
ROUND MARBLE BASE
Black with White Veins
Height 1"
Center Hole Slips 1/4 IPS*

                                 Countersunk
without Wire Way**       with Wire Way**
D02-18-30     6"                    
D02-18-40     7"                 D02-18-41*       7"

* limited Quanities Discontinued
H264-1
Round Black Zebra Marble Base 7/16 Inch Center Hole, 3/4 Inch Thick Polished Smooth, Countersunk Bottom Hole .40 Inch Deep X 1.5 Inch Diameter, With 5/16 Inch Diameter Wire Way. Edges Not Rounded-Crisp 90 Degree Angles

                                   Top                                        Diameter
B02-B4322B              5"
B02-B4323B              6"
Round White Marble Base
7/16 Inch Center Hole, 3/4 Inch Thick Polished Smooth, Countersunk Bottom Hole .40 Inch Deep X 1.5 Inch Diameter, With 5/16 Inch Diameter Wire Way. Edges Not Rounded-Crisp 90 Degree Angles

                                 Top                                                                 Diameter

B02-B4322W            5"
B02-B4323W            6"
SQUARE MARBLE BASE
White with Black Veins
Height 3/4"
Center Hole Slips 1/8 IPS
Countersunk*
Without Wire Way
                              Top Square
                                Diameter
B02-B4310                  3 x 3"

With wireway
B02-B4311                  5 x 5"
B02-B4312                  6 x 6"
SQUARE MARBLE and BRASS BASE
White with Black Veins
Height approximately 2 1/4"
3" Top 5" Bottom
Center Hole Slips 1/8 IPS
Countersunk* with Wire Way**

B02-B0002
This page was last updated: December 3, 2017
Page
Best if viewed with 1024 resolution!!!!
Rands Creative Creations   Harold Rand Enterprises
3729 Freeman Rd Jacksonville FL 32207
Ph 904 398 7925       Fax 904 396 6512
cs@hrelampparts.com