Shade Spiders
Solid Brass Spiders
Center diameter 7/8" Slips 1/8 IPS
Each Spoke is 3" long 7" outer diameter unfinished

D02-21-20     3 Spoke with #8-32 thread on end   
D02-21-21     4 Spoke with #8-32 thread on end   
Steel Spiders
Center diameter 7/8" Slips 1/8 IPS

12" Diameter
H05-D251-BPL-12  3 Spoke 10 Gauge W/O threaded end brass plated
H05-D252-BPL-12  4 Spoke 10 Gauge W/O threaded end brass plated

8" Diameter
H05-D251-BPL-8  3 Spoke 10 Gauge W/O threaded end brass plated
H05-D252-BPL-8  4 Spoke 10 Gauge W/O threaded end brass plated

Custom sizes can be quoted email requirements
cs@hrelampparts.com
Best if viewed with 1024 resolution!!!!
H270-10
Page
This page was last updated: February 19, 2016
Solid Brass Spiders Ring
Center diameter 7/8" Slips 1/8 IPS
Side Holes Tapped #8-32

D02-2-8803  3 Side Holes
D02-2-8804  4 Side Holes
Rands Creative Creations   Harold Rand Enterprises
3729 Freeman Rd Jacksonville FL 32207
  904 398 7925         800 255 8052
cs@hrelampparts.com
Steel Spiders
Center diameter 7/8" Slips 1/8 IPS

8" Diameter
H05-D253-NPL  3 Spoke 10 Gauge W/O threaded end nickel plated
H05-D252-NPL  4 Spoke 10 Gauge W/O threaded end nickel plated
Steel Spiders
Center diameter 7/8" Slips 1/8 IPS

7" Diameter
H05-D255-TIN  3 Spoke 8 Gauge W/O threaded end tin plated
Steel Spiders Ring
Center diameter 7/8" Slips 1/8 IPS
1/4" Thick Takes 10ga Wire

3-Way
H05-D251-BPL       3 Holes
H05-D253-W-NKL  3 Holes

4-Way
H05-D253-BPL       4 Holes
H05-D254-W-NKL  4 Holes